How To Remove Concrete Patio Attached House Foundations Without Removing

If you are planning to remove a concrete patio that is attached to your house foundation, it is important to do so carefully to avoid damaging the foundation. Here are some tips on how to do it safely and effectively.

1. Determine if the patio is attached to the foundation.

The first step is to determine if the patio is actually attached to the foundation. If the patio was poured at the same time as the house, it is likely that it is attached. However, if the patio was added on later, it may not be attached.

To check if the patio is attached, look for any cracks or gaps between the patio and the foundation. If there are no cracks or gaps, the patio is likely attached.

2. If the patio is attached, you will need to cut it away from the foundation.

To do this, you will need a concrete saw. Start by cutting a line around the perimeter of the patio, about 2 inches away from the foundation. Then, cut perpendicular lines every 2 feet or so. This will create a series of concrete blocks that can be removed.

3. Once the concrete blocks have been removed, you will need to dig out the remaining concrete.

To do this, use a pickaxe or a shovel. Be careful not to damage the foundation.

4. Once the concrete has been removed, you can backfill the area with soil or gravel.

Tamp down the soil or gravel to create a level surface.

5. If the patio was not attached to the foundation, you can simply remove it by breaking it up into smaller pieces.

To do this, use a sledgehammer or a concrete breaker.

Once the patio has been removed, you can dispose of the concrete pieces or use them for another project.