How To Fix A Concrete Patio That Holds Water

How to Fix a Concrete Patio That Holds Water

Concrete patios are a relatively low-maintenance addition to any home, but they can sometimes develop problems, such as holding water. If your concrete patio is holding water, it is important to fix the problem as soon as possible to prevent further damage. There are several potential causes of a concrete patio holding water, and the solution will vary depending on the cause.

One common cause of a concrete patio holding water is poor drainage. If the patio is not sloped properly, water will pool on the surface and can eventually seep into the concrete. To fix this problem, you will need to re-slope the patio so that water drains away from the house. You can do this by adding a layer of gravel or sand under the patio and then re-laying the concrete.

Another possible cause of a concrete patio holding water is cracks in the concrete. Cracks can allow water to seep into the concrete and cause it to deteriorate. To fix this problem, you will need to seal the cracks with a concrete sealant. You can find concrete sealants at most hardware stores.

If the concrete patio is holding water due to a problem with the subgrade, you will need to excavate the area under the patio and replace the subgrade with a more stable material. This is a more complex repair, and it is best to hire a professional to do it.

If you are not sure what is causing your concrete patio to hold water, it is best to consult with a professional. A professional can diagnose the problem and recommend the best course of action.

Here are some additional tips for preventing water from pooling on your concrete patio: * Make sure the patio is sloped properly so that water drains away from the house. * Seal any cracks in the concrete to prevent water from seeping in. * Keep the patio clean and free of debris. * Apply a water-repellent sealant to the patio to help prevent water from penetrating the concrete.