How To Fix Old Cement Patio Doors Not Working Properly

How to Fix Old Cement Patio Doors Not Working Properly

Cement patio doors are a common feature in many homes and businesses. They are durable and can provide a great view of the outdoors. However, over time, they can start to malfunction, making them difficult to open and close. If your cement patio door is not working properly, there are a few things you can do to fix it.

1. Check the Track

The first thing you should do is check the track of the door. The track is the metal channel that the door slides on. If the track is dirty or damaged, it can prevent the door from opening and closing smoothly. To clean the track, use a vacuum cleaner to remove any dirt or debris. If the track is damaged, you may need to replace it.

2. Adjust the Rollers

The rollers are located on the bottom of the door and allow it to slide on the track. If the rollers are not adjusted properly, the door will not open and close smoothly. To adjust the rollers, use a wrench to loosen the bolts that hold them in place. Once the bolts are loose, you can adjust the rollers so that the door slides smoothly on the track.

3. Lubricate the Hinges

The hinges on the door can also become stiff over time. If the hinges are not lubricated, they can make it difficult to open and close the door. To lubricate the hinges, use a spray lubricant. Apply the lubricant to the hinges and work it into the joints. Once the hinges are lubricated, you should be able to open and close the door more easily.

4. Inspect the Weatherstripping

The weatherstripping around the door can also become damaged over time. If the weatherstripping is damaged, it can allow air and water to leak into the home. To inspect the weatherstripping, look for any tears or gaps. If you find any damage, you can replace the weatherstripping.

5. Tighten the Screws

Over time, the screws that hold the door in place can become loose. If the screws are loose, the door can become loose and difficult to open and close. To tighten the screws, use a screwdriver to tighten each screw until it is snug. Be careful not to overtighten the screws, as this can damage the door.

6. Replace the Door

If you have tried all of the above steps and your cement patio door is still not working properly, you may need to replace the door. Replacing a cement patio door is a major project, but it is one that can be done by a skilled do-it-yourselfer. If you are not comfortable replacing the door yourself, you can hire a contractor to do it for you.

Conclusion

If your cement patio door is not working properly, there are a few things you can do to fix it. By following the steps outlined in this article, you can get your door working smoothly again in no time.